stallionsden Posted October 2, 2020 Author Share Posted October 2, 2020 (edited) 6 hours ago, q123 said: 2 hours ago I downloaded both, the nitrogen version and the modlet and I noticed some prefab.xml s differ in the packs: RotationToFaceNorth: - xcostum_powerplant(byKam) - xcostum_ShoppingCenter_Galleria(by_Laz_Man) - xcostum_strange_cornfield(by_magoli) TotalVertices + TotalTriangles: - xcostum_Courthouse(by_Stallionsden) 😉 xcostum_Courthouse(by_Stallionsden).xml.htmlFetching info... The rotations of the courthouse is fine. There is a difference between the rwgmodlet and the nitro but both still spawn the same rotation even tho having different rotations. Nitro reads them differently to the rwg> the galleria tho needs rotating correctly in nitro as was missed. but rotated correctly in modlet.As with the strange cornfield. No seperate copies are required once galleria and strange cornfield are rotated properly you should be able to use either prefab folder in either nitro or modlet. Will note down errors and have a fix for galleria and strange cornfield in cp47. NItro (first pic) RWGModlet (2nd Pic) Edited October 2, 2020 by stallionsden (see edit history) Link to comment Share on other sites More sharing options...
arramus Posted October 3, 2020 Share Posted October 3, 2020 Putting CP46 through its paces on Alpha 19.2 (b3) of all things for players on low-mid end gaming rigs who want to experience enhanced gameplay with custom features. World settings: 8K with CP46 supporting vanilla built in Nitro. PC setup (Quite dated) i7 4770 / 24gb ddr3 / SSD for primary apps but running 7D2D on HDD / rx 5600 xt (6gb) At first there was a spike of 10-11gb while loading out. This continued for a while as regions unlocked and things settled down. After checking again 30 minutes later things looked very decent at a low 3gb. This was with Snufkin Custom Zombies and a whole host of mods on the server side as well as the necessary client addition of Bdub's Vehicles being drawn on in the client. What can I say? There really is hope now for lower end rigs with 8gb RAM (but adequate virtual paging to accommodate any spikes) to join CP modded servers and participate in the fun. Optimising the CP was probably hell at times, but thank you as the difference will make all the difference. Link to comment Share on other sites More sharing options...
stallionsden Posted October 3, 2020 Author Share Posted October 3, 2020 56 minutes ago, arramus said: Putting CP46 through its paces on Alpha 19.2 (b3) of all things for players on low-mid end gaming rigs who want to experience enhanced gameplay with custom features. World settings: 8K with CP46 supporting vanilla built in Nitro. PC setup (Quite dated) i7 4770 / 24gb ddr3 / SSD for primary apps but running 7D2D on HDD / rx 5600 xt (6gb) At first there was a spike of 10-11gb while loading out. This continued for a while as regions unlocked and things settled down. After checking again 30 minutes later things looked very decent at a low 3gb. This was with Snufkin Custom Zombies and a whole host of mods on the server side as well as the necessary client addition of Bdub's Vehicles being drawn on in the client. What can I say? There really is hope now for lower end rigs with 8gb RAM (but adequate virtual paging to accommodate any spikes) to join CP modded servers and participate in the fun. Optimising the CP was probably hell at times, but thank you as the difference will make all the difference. There is still more to come lol as well. Cp47 for myself has begun wolf is having a bit of a break and enjoying as he deserves. 1 Link to comment Share on other sites More sharing options...
Adr Posted October 3, 2020 Share Posted October 3, 2020 Hi all, Firstly - thank you guys so much for the work. Compopack with Nitrogen and Darkness Falls is keeping this game alive for me and my crew Now - followed the instructions exactly for cp46 yet whenever I generate a map all the POIS are in 11 straight lines in the bottom left of the map... Done th eusual delete everything and restart etc.. Any ideas? Cheers Adr Link to comment Share on other sites More sharing options...
stallionsden Posted October 3, 2020 Author Share Posted October 3, 2020 3 minutes ago, Adr said: Hi all, Firstly - thank you guys so much for the work. Compopack with Nitrogen and Darkness Falls is keeping this game alive for me and my crew Now - followed the instructions exactly for cp46 yet whenever I generate a map all the POIS are in 11 straight lines in the bottom left of the map... Done th eusual delete everything and restart etc.. Any ideas? Cheers Adr Turn off the ocd map lol last row of options in nitrogen map make it none Link to comment Share on other sites More sharing options...
Adr Posted October 3, 2020 Share Posted October 3, 2020 Doh!!!! Thanks mate Next dumbass question as I used to have this working...... How do I get the Darkness Falls POIS into the map - specifically the two ones needed for the endgame? Link to comment Share on other sites More sharing options...
Adr Posted October 3, 2020 Share Posted October 3, 2020 Next dumbass question as I used to have this working...... How do I get the Darkness Falls POIS into the map - specifically the two ones needed for the endgame? Link to comment Share on other sites More sharing options...
wolfbain5 Posted October 3, 2020 Share Posted October 3, 2020 30 minutes ago, Adr said: Next dumbass question as I used to have this working...... How do I get the Darkness Falls POIS into the map - specifically the two ones needed for the endgame? we do not handle darkness falls as they mod prefabs from the CP, and we dont have the same files Link to comment Share on other sites More sharing options...
Adr Posted October 3, 2020 Share Posted October 3, 2020 Roger that Link to comment Share on other sites More sharing options...
canadianbluebeer Posted October 3, 2020 Share Posted October 3, 2020 Just curious as to which POI were considered to be gamebreakingly overpowered. there are a few that had insane amounts of loot, which I found hilarious. The library tower had a LOT of books, but it's a library, it should have a lot of books. (also had a lot of zombies, so had to work to get them) btw, I cleared 3 of those towers, never did get the workstation schematic I was looking for. (or a couple others) RNG is still RNG, so I hope that got left alone. I checked the changlog, and it doesn't say which ones got loot reductions. (I'd like to check them in 45 before going to 46+) Just for giggles. Link to comment Share on other sites More sharing options...
SnowDog1942 Posted October 3, 2020 Share Posted October 3, 2020 17 hours ago, stallionsden said: There is still more to come lol as well. Cp47 for myself has begun wolf is having a bit of a break and enjoying as he deserves. That lazy bum But seriously, thank you both so much. Link to comment Share on other sites More sharing options...
stallionsden Posted October 3, 2020 Author Share Posted October 3, 2020 3 minutes ago, SnowDog1942 said: That lazy bum But seriously, thank you both so much. Lol. No problems glad your enjoying it. Link to comment Share on other sites More sharing options...
Mythixdino Posted October 3, 2020 Share Posted October 3, 2020 (edited) 10 hours ago, Adr said: Compopack with Nitrogen and Darkness Falls is keeping this game alive for me and my crew DF isn't compatible with nitrogen btw. You can ask Khaine if you don't believe me. Eventually DF will also update the POIs, since better performance is of high value (in general). So thank you all for the work put into this Edited October 3, 2020 by Mythixdino (see edit history) Link to comment Share on other sites More sharing options...
wolfbain5 Posted October 3, 2020 Share Posted October 3, 2020 All prefabs are having their loot checked. only prefabs starting with A and B have been done, the rest are ongoing for cp 47. The cp will not be easy loot. the cp is for variety and challenge. so we have the variety, and we will be introducing greater challenges for fun. expect traps set by the bandits that TFP has yet to introduce. traps set by people who have died for whatever reason and now there are zombies around them. I will be going through as well on the major quest pathing. this will entail better graphical directions as to how to get in and around with the use of lights or signs and their like. Zombies will start to be hand placed more logically to fit the narrative, as it stands what we have are mostly fill ins from before sleeper volumes were introduced, which is why many in 43 and 44 didnt have much. CP 47 wont be out anytime soon, so I hope you all enjoy what has been done so far. we still have a lot of clean up to do and other work to be done. and we want a large chunk finished before we release again. Feel free to leave quest not working reports, but when you do, a screen shot of the quest with its location in text would be highly appreciated. as an example Link to comment Share on other sites More sharing options...
stallionsden Posted October 3, 2020 Author Share Posted October 3, 2020 5 hours ago, canadianbluebeer said: Just curious as to which POI were considered to be gamebreakingly overpowered. there are a few that had insane amounts of loot, which I found hilarious. The library tower had a LOT of books, but it's a library, it should have a lot of books. (also had a lot of zombies, so had to work to get them) btw, I cleared 3 of those towers, never did get the workstation schematic I was looking for. (or a couple others) RNG is still RNG, so I hope that got left alone. I checked the changlog, and it doesn't say which ones got loot reductions. (I'd like to check them in 45 before going to 46+) Just for giggles. There were a few of my pois lol. The trader pois that are in there. But there has to be a balance not over looted not no loot. To many boss chests for low level pois etc. Large prefabs will still have more loot then smaller pois. But to walk into a house and get 3 boss chests for a tier 1 is to much loot. Or walk into a tier 1 and get a locked boss chest locked doors etc isn't how tier 1s should work. I am with you and rng is rng sometimes you get 100 crates and get 1 item. The next play thru you can get 100 items. Also the loot settings people play on to also have an effect and we need to have a balance with all this in mind. Link to comment Share on other sites More sharing options...
Elastofu Posted October 4, 2020 Share Posted October 4, 2020 Tried to run this pack with the latest stable DF release and got naught but null reference errors in the console. I take it this is normal or do they already use it in their own pack? Link to comment Share on other sites More sharing options...
stallionsden Posted October 4, 2020 Author Share Posted October 4, 2020 5 minutes ago, Elastofu said: Tried to run this pack with the latest stable DF release and got naught but null reference errors in the console. I take it this is normal or do they already use it in their own pack? DF use their own copy/version of the Compo Pack. and is completely seperate from the CP. Link to comment Share on other sites More sharing options...
Gouki Posted October 5, 2020 Share Posted October 5, 2020 Hi Stallionsden and Wolfbain5 Passing by to thank you from the bottom of my heart, for the great work you have done with this new version of the CompoPack, the performance is much better, the prefabs are better leveled in terms of objects, (about zombies I can't say the same, haha , sure is a Stallionsden thing) etc. I hope everything goes much better in the next CompoPacks and with respect to Magoli that everything is fine. Regards Link to comment Share on other sites More sharing options...
stallionsden Posted October 5, 2020 Author Share Posted October 5, 2020 1 hour ago, Gouki said: Hi Stallionsden and Wolfbain5 Passing by to thank you from the bottom of my heart, for the great work you have done with this new version of the CompoPack, the performance is much better, the prefabs are better leveled in terms of objects, (about zombies I can't say the same, haha , sure is a Stallionsden thing) etc. I hope everything goes much better in the next CompoPacks and with respect to Magoli that everything is fine. Regards Lol haha did you like it. I guess you visited one of my prefabs lol Link to comment Share on other sites More sharing options...
Lumpus Posted October 5, 2020 Share Posted October 5, 2020 Love the CP46 update Created a new random Nitrogen map with CP46 and did find some weirdnesses - towns/cities all mashed together in the center with just raw biome surrounding it for endless miles. Also all of the traders all spawned together next to each other at the edge of the city (south side I think). Also the raceway POI seemed to have been excessively favored and spawned every 3-4 buildings. Quit and am now playing the CP46000 map... like it so far ! Link to comment Share on other sites More sharing options...
wolfbain5 Posted October 6, 2020 Share Posted October 6, 2020 (edited) 1 hour ago, Lumpus said: Love the CP46 update Created a new random Nitrogen map with CP46 and did find some weirdnesses - towns/cities all mashed together in the center with just raw biome surrounding it for endless miles. Also all of the traders all spawned together next to each other at the edge of the city (south side I think). Also the raceway POI seemed to have been excessively favored and spawned every 3-4 buildings. Quit and am now playing the CP46000 map... like it so far ! you didnt turn off scenario, you are in the ocd testing scenario on the right hand side of nitrogen Edited October 6, 2020 by wolfbain5 (see edit history) Link to comment Share on other sites More sharing options...
Lumpus Posted October 6, 2020 Share Posted October 6, 2020 I think you're right... never even noticed it /retrying Link to comment Share on other sites More sharing options...
spy_incognito Posted October 7, 2020 Share Posted October 7, 2020 Hey all... kind of a bit stuck and maybe you can help. Ive tried using the CompoPack46 on a hosted server. It was 19.1 experimental at the time. I followed instructions and used the Nitrogen path. Copied the resource files, copied the prefabs etc. I generated a 6k map and uploaded it to the server and started it up... and things were not right. There were huge terrain walls like the height map was all jacked up. I thought maybe it was something with the generated files so I redid them and reuploaded it and still issues. I decided to try it on my local system and took the same files and it runs and looks fine, no issues. For some reason it only has issues on the dedicated server. Ive even tried rolling back to stable 19 and that didnt help, nor did using the CP46000 provided map and files. I included a screenshot for reference. Really not sure what to do here and scratching my head. I did open the 7DTD console control panel on the hosted server and when it starts up it throws errors that it cannot find certain prefabs, but I checked and the files do show there. example: 2020-10-07T16:20:52 29.795 WRN Could not load prefab 'xcostum_bridgesideapartmentsA16(by_Batman)'. Skipping it Link to comment Share on other sites More sharing options...
wolfbain5 Posted October 7, 2020 Share Posted October 7, 2020 check your hosted server version Link to comment Share on other sites More sharing options...
spy_incognito Posted October 7, 2020 Share Posted October 7, 2020 3 minutes ago, wolfbain5 said: check your hosted server version I did. Both server and client are currently stable 19. Wonder if the file encoding would be jacked since host is a Linux box and I'm windows. Maybe line ending are bleh.. I'll have to check. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now