Modlet Magolis Compo Pack by The Compopack

[Gouki]

2 minutes ago, stallionsden said:

Try deleting the cp prefabs in your game prefab folder. Re download again and re add the prefabs to the game prefab folder.

 

 

 

I just downloaded the compopack for KingGen again and I realized that something has changed (I don't know what it is), because in the previous version the folder shows 04/21/21 and the folder of the new download 06/01/21, I'm going to check to see if it works and then I'll tell you.
Thank you very much for the help.
Regards

[stallionsden]

30 minutes ago, Gouki said:

 

I just downloaded the compopack for KingGen again and I realized that something has changed (I don't know what it is), because in the previous version the folder shows 04/21/21 and the folder of the new download 06/01/21, I'm going to check to see if it works and then I'll tell you.
Thank you very much for the help.
Regards

Anytime mate.

 

Let me know

[Gouki]

On 6/7/2021 at 5:28 PM, stallionsden said:

Anytime mate.

 

Let me know

 

Hi Stallions

 

Everything works great again, thanks for the help (something changed in the new version that I download).
I had to do the whole process, add some new pois, generate a map and all good.
Regards

[Samdaman1995]

On 6/6/2021 at 9:12 PM, stallionsden said:

If the map is empty they should spawn in. Some map creators add pois themselves..

 

 

Ok, what about the world options from the base game?

[stallionsden]

14 minutes ago, Samdaman1995 said:

Ok, what about the world options from the base game?

A pre made map by a map creator will have a save name you scroll thru the names in mew game til that map name appears. Then select your options and play

56 minutes ago, Gouki said:

 

Hi Stallions

 

Everything works great again, thanks for the help (something changed in the new version that I download).
I had to do the whole process, add some new pois, generate a map and all good.
Regards

Argh awesome to hear 🙂

[Samdaman1995]

2 minutes ago, stallionsden said:

A pre made map by a map creator will have a save name you scroll thru the names in mew game til that map name appears. Then select your options and play

Argh awesome to hear 🙂

I'm talking about the maps that came with the game, not custom made ones.

Will the new POIs appear in the maps that came with the game?

[stallionsden]

25 minutes ago, Samdaman1995 said:

I'm talking about the maps that came with the game, not custom made ones.

Will the new POIs appear in the maps that came with the game?

Ok you were talking previously bout handmade maps. 

 

Ok then yeh name your world. Name your seed select size select options start game as long as the modlet is in your Mods folder where the .exe is then the pois will spawn .

[Samdaman1995]

1 minute ago, stallionsden said:

Ok you were talking previously bout handmade maps. 

 

Ok then yeh name your world. Name your seed select size select options start game as long as the modlet is in your Mods folder where the .exe is then the pois will spawn .

I was, I'm not talking about custom maps anymore though, I'm talking about the maps that are built into the base game

[stallionsden]

1 hour ago, Samdaman1995 said:

I was, I'm not talking about custom maps anymore though, I'm talking about the maps that are built into the base game

Ok so just follow the directions/instructions in the O.P and all will work. 

[Samdaman1995]

1 minute ago, stallionsden said:

Ok so just follow the directions/instructions in the O.P and all will work. 

Cool, didn't expect that it'd work for those maps.

[Anxiety123]

So, I have a world with precisely one trader in the pine forest biome.  The initial White River Citizen tutorial quest ('quest_WhiteRiverCitizen1') can only take you to a trader in that biome.  I've had worlds with no valid trader, so the quest has no location.  In this particular world, despite a trader ('xcostum_Multi_Trader(by_Sparrow)') existing in the correct biome, my quest had no location.  So I checked the prefab XML.

 

It turns out that several of the Compo Pack's traders ('TraderArea' set to 'True') do not have a 'QuestTags' property (with the 'trader' tag).  I have not tested it, but I suspect this tag controls whether it can be selected as a quest destination.  This probably also applies to the "special" quests (e.g. 'tier2_nexttrader') offered when you complete a quest tier.

 

All trader POIs probably need that tag.

[stallionsden]

2 hours ago, Anxiety123 said:

So, I have a world with precisely one trader in the pine forest biome.  The initial White River Citizen tutorial quest ('quest_WhiteRiverCitizen1') can only take you to a trader in that biome.  I've had worlds with no valid trader, so the quest has no location.  In this particular world, despite a trader ('xcostum_Multi_Trader(by_Sparrow)') existing in the correct biome, my quest had no location.  So I checked the prefab XML.

 

It turns out that several of the Compo Pack's traders ('TraderArea' set to 'True') do not have a 'QuestTags' property (with the 'trader' tag).  I have not tested it, but I suspect this tag controls whether it can be selected as a quest destination.  This probably also applies to the "special" quests (e.g. 'tier2_nexttrader') offered when you complete a quest tier.

 

All trader POIs probably need that tag.

Hi @Anxiety123

 

The multi traders have that left out on purpose. As they should be rare finds and you happen upon them. Since the 1 you mention has 1 of each trader.This is done on purpose

 

 

[Kalen]

Is it intended for so many of the POIs to have ShowQuestClearCount = 0?

 

It makes clear quests, particularly on some of the larger POIs, a real pain to complete.

 

[stallionsden]

1 hour ago, Kalen said:

Is it intended for so many of the POIs to have ShowQuestClearCount = 0?

 

It makes clear quests, particularly on some of the larger POIs, a real pain to complete.

 

No they should have atleast one. I will address this for the next release. Thank you for bringing this up 🙂

[orlydb]

can I use the compo pack with 19.5?

[stallionsden]

11 minutes ago, orlydb said:

can I use the compo pack with 19.5?

Hi @orlydb

 

Yes you can

[BT13]

Been using CP47 with Nitrogen and can get all the  skyscrapers in one city by making new maps till I get what I like.  Makes it feel like a real city with all the tall buildings.  Have switched to KingGen with CP47 and can't seem to get more than half of the tall buildings to spawn.  Have made many maps to try to get them to show up.  Is it just a luck of the draw thing or am I doing something wrong.  Have settings set in KingGen for large cities and large city grid.

[stallionsden]

1 hour ago, BT13 said:

Been using CP47 with Nitrogen and can get all the  skyscrapers in one city by making new maps till I get what I like.  Makes it feel like a real city with all the tall buildings.  Have switched to KingGen with CP47 and can't seem to get more than half of the tall buildings to spawn.  Have made many maps to try to get them to show up.  Is it just a luck of the draw thing or am I doing something wrong.  Have settings set in KingGen for large cities and large city grid.

The whole map or.

 

Have you set your biomes to large to.

 

Don't think you are doing anything wrong. It could be kinggen is spreading them out or luck of the draw. 

 

Nitrogen allowed us to place better pois in the zones Nitrogen had as we were able to input the pois manually into the correct zones. Kinggen handles that within its self. 

[BT13]

Will Check if biomes are on large.  Thanks.

[zztong]

On 6/14/2021 at 6:29 PM, Kalen said:

Is it intended for so many of the POIs to have ShowQuestClearCount = 0?

 

It makes clear quests, particularly on some of the larger POIs, a real pain to complete.

 

For my education, what is the effect of both settings?

[stallionsden]

24 minutes ago, zztong said:

For my education, what is the effect of both settings?

A setting of 0 will show no last volume marker (yellow) marker

 

A setting of 1 to 3 will show last volume area

[zztong]

24 minutes ago, stallionsden said:

A setting of 0 will show no last volume marker (yellow) marker

 

A setting of 1 to 3 will show last volume area

Oh, the little yellow dot when there's only one (or a few) Z's left?

[Kalen]

2 hours ago, zztong said:

For my education, what is the effect of both settings?

ShowQuestClearCount is how many groups of zombies need to be remaining on a clear quest before the yellow dots appear on your compass showing you the locations of the groups you missed.

 

When its set to zero, you'll never get the yellow dots on a clear quest.

 

 

[TheBus4K]

I love this mod but at the same time I have been very disappointed.

 

The new buildings seem to me to be incredibly well made, even much better than the current ones in the official game, it shows that the people who created them have made an effort, but...

God, quests in these buildings are like a pain in the ass. The official buildings (vanilla) are created in such a way that you don't need to break any blocks to complete the quest, and that seems incredible to me, because otherwise, you would spend an immense amount of time to find where the zombies or the package are, which is what happened to me with a custom building of this mod. Most (or all) of the buildings in this mod can NOT be completed without breaking doors and / or blocks. I just did a simple Tier 3 mission to clean up zombies and it took me a whole day just because the building didn't tell me where to go and everything was closed. Closed doors, places closed with wood, etc. I had to break a lot of blocks and doors to find the zombies.

Just the buildings themselves are incredibly elaborate, but every time there is a quest in those buildings I will have to reject it, because it isn't that it's difficult, it's that it takes a long time because there is no "established path".

I don't know if there is any way to solve this, but if there is I would love to know, I have fallen in love with the buildings in this mod and when I saw that there were also quests in these buildings I was very excited, until I saw this problem...

[stallionsden]

1 hour ago, TheBus4K said:

I love this mod but at the same time I have been very disappointed.

 

The new buildings seem to me to be incredibly well made, even much better than the current ones in the official game, it shows that the people who created them have made an effort, but...

God, quests in these buildings are like a pain in the ass. The official buildings (vanilla) are created in such a way that you don't need to break any blocks to complete the quest, and that seems incredible to me, because otherwise, you would spend an immense amount of time to find where the zombies or the package are, which is what happened to me with a custom building of this mod. Most (or all) of the buildings in this mod can NOT be completed without breaking doors and / or blocks. I just did a simple Tier 3 mission to clean up zombies and it took me a whole day just because the building didn't tell me where to go and everything was closed. Closed doors, places closed with wood, etc. I had to break a lot of blocks and doors to find the zombies.

Just the buildings themselves are incredibly elaborate, but every time there is a quest in those buildings I will have to reject it, because it isn't that it's difficult, it's that it takes a long time because there is no "established path".

I don't know if there is any way to solve this, but if there is I would love to know, I have fallen in love with the buildings in this mod and when I saw that there were also quests in these buildings I was very excited, until I saw this problem...

Hi @TheBus4K

 

  Doors in vanilla are locked also. 

 

The compopack is bigger challenge then vanilla. Some loot is well hidden. Doors locked as long as the door is of equal to the tier. The zombies and traps are more then vanilla and the level of difficulty is higher to.

 

If you feel a poi is wrong welcome to supply a name of the poi and I will happily take a look. But the compopack has a higher rule set then vanilla as well. 

 

In regards to finding last volume these will be fixed in next release.

 

To get name of poi

 

- DM in console then escape

- then press f3

- a set of boxes will appear on the left of h.u.d

- the fly upto poi and name will appear tho sometimes you may have to fly around a bit to get name.  

 

Then simply supply and I will take a look 

 

Regards

Stallionsden

Edited June 24, 2021 by stallionsden (see edit history)