azragarn Posted July 2, 2020 Share Posted July 2, 2020 51 minutes ago, Mizdefy said: @azragarn this maybe the answer you're looking for regarding traders spawning underground Thanks Mizdefy, so much info coming out. Ill try resetting / recreating my prefab list and try again Link to comment Share on other sites More sharing options...
kamer Posted July 2, 2020 Share Posted July 2, 2020 Hi Damocles, Do you have any plans to make your tool open source? Would be awesome to have more people try out their ideas. Thanks for all your efforts! Link to comment Share on other sites More sharing options...
Jugom Posted July 2, 2020 Share Posted July 2, 2020 6 hours ago, kamer said: Hi Damocles, Do you have any plans to make your tool open source? Would be awesome to have more people try out their ideas. Thanks for all your efforts! he said not long ago that he was not planning on doing that in the near future Link to comment Share on other sites More sharing options...
Marvin77600 Posted July 2, 2020 Share Posted July 2, 2020 Hi Damocles, I have a problem with an 8K map generated with NitroGen v0.500. Everything is fine except that there are areas on the map where there is a large expanse of land, very flat and without any decoration. Do you know where that could come from ? My biomes.xml : My map on the livemap : The very flat areas are in dark green. Link to comment Share on other sites More sharing options...
Damocles Posted July 2, 2020 Author Share Posted July 2, 2020 6 minutes ago, Marvin77600 said: Hi Damocles, I have a problem with an 8K map generated with NitroGen v0.500. Everything is fine except that there are areas on the map where there is a large expanse of land, very flat and without any decoration. Do you know where that could come from ? My biomes.xml : My map on the livemap : The very flat areas are in dark green. Your water levels might be off somehow. The flat areas are lakes. I dont know what you have all edited on your map, since you use a vanilla biome.png. Link to comment Share on other sites More sharing options...
thatsapaddlin' Posted July 2, 2020 Share Posted July 2, 2020 app_update 294420 -beta latest_experimental Happening now for my a19 b157 on a Nitrogen v501 random gen map. If you don't hear from me then everything went fine. Not erasing the save game for this as the patch notes didn't have anything to suggest it wouldn't work. So far this a19 experience is much nicer than what we went through for a17 Really enjoying the game. Feels a bit more like what I enjoyed about a16 (except the mining helmets are working). Link to comment Share on other sites More sharing options...
[email protected] Posted July 3, 2020 Share Posted July 3, 2020 Tried to use 6 nitrogen generated maps ranging from 8k-12k. All have the same end result of error out of memory before crashing. Any clues as to where I am going wrong? 2020-07-02T19:02:36 85.851 INF Processing world files 2020-07-02T19:02:43 92.903 ERR Exception in task 2020-07-02T19:02:43 92.903 EXC Out of memory OutOfMemoryException: Out of memory at (wrapper managed-to-native) System.Object.__icall_wrapper_ves_icall_array_new_specific(intptr,int) at PNG2TGA.Process3 (UnityEngine.Color32[] pixels, System.Int32 _width, System.Int32 _height) [0x002f3] in <a2538df5b41c45f8bedf398d395b84f0>:0 at Utils.SaveTextureAsTGA (UnityEngine.Color32[] _colors, System.Int32 _width, System.Int32 _height, System.String _fileName) [0x00005] in <a2538df5b41c45f8bedf398d395b84f0>:0 at ChunkProviderGenerateWorldFromRaw+<processFiles>d__27.MoveNext () [0x0045c] in <a2538df5b41c45f8bedf398d395b84f0>:0 at UnityEngine.SetupCoroutine.InvokeMoveNext (System.Collections.IEnumerator enumerator, System.IntPtr returnValueAddress) [0x00027] in <5e1dfb686eb345078a588df96401afcc>:0 (Filename: <a2538df5b41c45f8bedf398d395b84f0> Line: 0) OutOfMemoryException: Out of memory at (wrapper managed-to-native) System.Object.__icall_wrapper_ves_icall_array_new_specific(intptr,int) at PNG2TGA.Process3 (UnityEngine.Color32[] pixels, System.Int32 _width, System.Int32 _height) [0x002f3] in <a2538df5b41c45f8bedf398d395b84f0>:0 at Utils.SaveTextureAsTGA (UnityEngine.Color32[] _colors, System.Int32 _width, System.Int32 _height, System.String _fileName) [0x00005] in <a2538df5b41c45f8bedf398d395b84f0>:0 at ChunkProviderGenerateWorldFromRaw+<>c__DisplayClass27_0.<processFiles>b__1 (ThreadManager+TaskInfo _taskInfo) [0x00044] in <a2538df5b41c45f8bedf398d395b84f0>:0 at ThreadManager.myQueuedTaskInvoke (System.Object _taskInfo) [0x00041] in <a2538df5b41c45f8bedf398d395b84f0>:0 Link to comment Share on other sites More sharing options...
V170 Posted July 3, 2020 Share Posted July 3, 2020 I am having a similar issue with Nitrogen maps in A19 regarding ram usage. The game will crash on me after using 10+ gigs of ram, after 10-15 mins or so. Link to comment Share on other sites More sharing options...
[email protected] Posted July 3, 2020 Share Posted July 3, 2020 Tried loading it in single player then uploading to the server and still get out of memory exception. 2020-07-02T19:35:27 87.024 ERR Loading prefabs xml file for level 'Dirty Hookers': Out of memory 2020-07-02T19:35:27 87.024 EXC Out of memory Link to comment Share on other sites More sharing options...
thatsapaddlin' Posted July 3, 2020 Share Posted July 3, 2020 (edited) 52 minutes ago, thatsapaddlin' said: app_update 294420 -beta latest_experimental Happening now for my a19 b157 @OhYa Yeah so that didn't successfully update to b157. Trying again with app_update 294420 -beta "latest_experimental - Unstable build" I read somewhere you need to enter it as you see it in the list of betas in the game steam library properties area. ... tried that above. Still didn't work. Outta luck I guess. Edited July 3, 2020 by thatsapaddlin' (see edit history) Link to comment Share on other sites More sharing options...
thatsapaddlin' Posted July 3, 2020 Share Posted July 3, 2020 Is anyone able to point me in the right direction for some basic info on how to update to experimental builds (ie the new a19b157)? I'm sure this thread has better things to discuss than my noob server problems I have googled a lot and there is some solid information for getting the servers up and running. But not much when it comes to updating to builds. For example, are you always required to delete the entire app and game files (sounds like overkill for a new build). I'm assuming the process changes when updating from builds to a full alpha release, right? Anyway, thanks for any info, hopefully I can pass on some of my knowledge once I figure it all out. Link to comment Share on other sites More sharing options...
diegodgo87 Posted July 3, 2020 Share Posted July 3, 2020 Great tool Damocles, memory usage doing 8k maps, Great Work! https://imgur.com/LVYMmtB Link to comment Share on other sites More sharing options...
Damocles Posted July 3, 2020 Author Share Posted July 3, 2020 The generation will take a lot of ram, as the game uses several full size images to define the world. Turning off the preview map generation will save some ram. (there is a tool to generate previews afterwards) Also: close NitroGen when playing the game, to release the system memory. Link to comment Share on other sites More sharing options...
Tylos Posted July 4, 2020 Share Posted July 4, 2020 thank you Damocles for the great tool! its possible to setup, that the pois dont cross the regions border? Link to comment Share on other sites More sharing options...
[email protected] Posted July 4, 2020 Share Posted July 4, 2020 Anyone else experiencing dedicated server crash upon loading the prefablist? Anyone figure out how to work around it? Link to comment Share on other sites More sharing options...
CrainBramp Posted July 4, 2020 Share Posted July 4, 2020 (edited) Here is what I believe is my final edit for the prefab list until the new CompoPack comes out for A19. The last one had a few issues I discovered after playing, and this corrects those. This prefab list merges the new A19 prefabs, CompoPack43, and also removes all erroring POIs from CompoPack43 that don't work in A19. I've generated this in debug mode and normal, and it loads fine on both Single player and Multiplayer, and I've double checked the generated worlds prefab list to assure new POIs are generated. Have added comments to the file for what the new prefabs are and which ones were disabled. Link: https://pastebin.com/AhnV11xu Instructions: Drop this in the resources directory of Nitro and select "Custom List" Also, I was generating a batch of 8k maps for our community server, so if anyone is looking for quick worlds, just download and go. Single/MP compatible. https://s3.us-east-1.amazonaws.com/cdn.craincraft.com/NitroA19CP43-1.ziphttps://s3.us-east-1.amazonaws.com/cdn.craincraft.com/NitroA19CP43-2.ziphttps://s3.us-east-1.amazonaws.com/cdn.craincraft.com/NitroA19CP43-3.ziphttps://s3.us-east-1.amazonaws.com/cdn.craincraft.com/NitroA19CP43-4.ziphttps://s3.us-east-1.amazonaws.com/cdn.craincraft.com/NitroA19CP43-5.zip yourownlist.txt Edited July 4, 2020 by CrainBramp (see edit history) Link to comment Share on other sites More sharing options...
belowzeros Posted July 5, 2020 Share Posted July 5, 2020 (edited) 7 hours ago, CrainBramp said: Here is what I believe is my final edit for the prefab list until the new CompoPack comes out for A19. The last one had a few issues I discovered after playing, and this corrects those. Thanks for the updated list. I had some more errors but they might result from items removed from the game in custom POIs. https://steamcommunity.com/sharedfiles/filedetails/?id=2154598118 https://steamcommunity.com/sharedfiles/filedetails/?id=2154598074 Edited July 5, 2020 by belowzeros (see edit history) Link to comment Share on other sites More sharing options...
CrainBramp Posted July 5, 2020 Share Posted July 5, 2020 (edited) Those errors are for POIs that are already commented out in my pefab list; I double-checked. Unless (a) you didn't use the custom list option in Nitrogen, or (b) there was some sort of unexpected error. The only oddity I seem to be experiencing now is that the initial quest to find a trader ... all my Nitrogen maps say "NO TRADER" for that initial quest ... but, there is still a HUD quest marker for the quest, and the quest completes ... so it works. *shrug* I dunno. Edited July 5, 2020 by CrainBramp Clarification (see edit history) Link to comment Share on other sites More sharing options...
TheRealMikeD Posted July 5, 2020 Share Posted July 5, 2020 @Damocles I really appreciate all the work you've put into this utility. Donated. Thanks again for supporting the community and please keep up the great work! 1 Link to comment Share on other sites More sharing options...
belowzeros Posted July 6, 2020 Share Posted July 6, 2020 19 hours ago, CrainBramp said: Those errors are for POIs that are already commented out in my pefab list; I double-checked. Unless (a) you didn't use the custom list option in Nitrogen, or (b) there was some sort of unexpected error. thanks for taking the time to reply. I tried again with the same issues so I reinstalled Nitrogen for kicks and it worked as intended. =/ something must have been overwritten at some point I dunno. I don't think this is related but I still get a lot of these red errors flying around the map: "onMetalDesk02Open should be a parent but is not (1)". "onMetalDesk01Open should be a parent but is not (1)". I was playing on Navez and saw that error there too so I think this is something likely vanilla. Just curious is you had seen that in your testing. or know what is wrong there. Link to comment Share on other sites More sharing options...
kaneta1 Posted July 6, 2020 Share Posted July 6, 2020 sorry As I am poor at English, it becomes the funny words compopack xvanilla_settlement_trader_0x As I do not give a response in the quest of the new method Therefore these xvanilla_settlement_trader_04 → trader_bob xvanilla_settlement_trader_02 → trader_joel xvanilla_settlement_trader_03 → trader_jen xvanilla_settlement_trader_01 → trader_rekt xvanilla_settlement_trader_05 → trader_hugh it to transfer it Link to comment Share on other sites More sharing options...
sirwin44 Posted July 8, 2020 Share Posted July 8, 2020 I create a map using NitroGen and using Compo pack, corrected for A19. Some POIs load correctly at first, then glitch out. Is there a fix to this? Pics attached to show what im experiencing. Link to comment Share on other sites More sharing options...
Annihilatorza Posted July 9, 2020 Share Posted July 9, 2020 HI Damocles On my video I got a comment asking the following and I was wondering if you could help. DragonFly3 days ago I created a NitroGen map a week ago. Looks great with the new Alpha19 but the Trader POI's have not spawned in. Any advice? My version is v0474. Cheers I suspect old vs new Alpha clashing. Link to comment Share on other sites More sharing options...
GamingWithKentuckianJD Posted July 9, 2020 Share Posted July 9, 2020 i am using the A19 and the crawlers are invisible. it is only with Nitrogen. is there a fix? or is it another issue? Thanks Link to comment Share on other sites More sharing options...
Jugom Posted July 10, 2020 Share Posted July 10, 2020 21 hours ago, GamingWithKentuckianJD said: i am using the A19 and the crawlers are invisible. it is only with Nitrogen. is there a fix? or is it another issue? Thanks AFAIK, invisible Zs were related to client and server not being in the same game version. Link to comment Share on other sites More sharing options...
Recommended Posts