Jump to content

Magolis Compo Pack (Current Thread) by Wolfbain5 and Stallionsden


stallionsden

Recommended Posts

3 hours ago, quietone748 said:

Thank you. I have now installed everything according to the instructions and it created a map for me; however, none of the new compopack buildings/sites have been generated in my map, just vanilla POIs. Am I missing a step? I went by the YT howto video.

Which method did you use. 

 

Modlet - simply drag folder and drop into mods folder. 

 

Nitrogen - drag and drop the 3 txt files into nitrogen resource folder (overwrite yes)

 

- open prefabs folder in dl ctrl a to select all and drag and drop into game prefabs folder 

 

- in nitrogen program make sure a19.1 cp46 is selected in the prefablist option and scenario is set to none. 

 

 

Link to comment
Share on other sites

On 11/26/2020 at 3:04 PM, stallionsden said:

Which method did you use. 

 

Modlet - simply drag folder and drop into mods folder. 

 

Nitrogen - drag and drop the 3 txt files into nitrogen resource folder (overwrite yes)

 

- open prefabs folder in dl ctrl a to select all and drag and drop into game prefabs folder 

 

- in nitrogen program make sure a19.1 cp46 is selected in the prefablist option and scenario is set to none. 

 

 

I went by the instructions that were in the YouTube video as well as the ones in the Compopack (INSTALL_INSTRUCTION.txt). They describe the same thing.
Chose scenario none, but I only have A19.1 Vanilla OR A18 Compo Pack 43 .
The prefabs are in my Steamapps\Data\Prefabs list.
I have generated three 8K maps but none of them had the new POIs. When I copied the CP46000 into my Users\...\AppData\...\Generated Worlds folder, I can run that map and it has the new POIs. But I don't want to be able to play in just that one map. I am very excited about this mod, which is why I'm coming back here to ask you for help to figure out what I did wrong.

I just copied the mod into my mods folder.

I do not have the capability of choosing A19.1 Compo Pack 43. That is probably the issue. It is not appearing in the dropdown as an option.

Edited by quietone748 (see edit history)
Link to comment
Share on other sites

6 minutes ago, quietone748 said:

I went by the instructions that were in the YouTube video as well as the ones in the Compopack (INSTALL_INSTRUCTION.txt). They describe the same thing.
Chose the correct a19.1 cp46 and scenario none.

The prefabs are in my Steamapps\Data\Prefabs list.
I have generated three 8K maps but none of them had the new POIs. When I copied the CP46000 into my Users\...\AppData\...\Generated Worlds folder, I can run that map and it has the new POIs. But I don't want to be able to play in just that one map. I am very excited about this mod, which is why I'm coming back here to ask you for help to figure out what I did wrong.

One thing I am not seeing is the mod in my Mods folder. Not sure how to get a copy of that and just drag it into there. Maybe that would work.

You either use nitrogen or modlet.  You cant use both..

 

So if you want to use modet dl the  modlet version then drag and drop folder into Mods folder which you should have in the folder the exe is. If not create a folder do not use nitrogen or add prefabs to game prefab folder.

 

If using nitrogen do not add modlet either. Simply add prefabs to game prefab folder as Instructed. Then copy the 3 nitrogen txt I to nitrogen resource folder.  Then create your world generate drag and drop worldninto generated world. That is the only way to do it using nitrogen. 

Link to comment
Share on other sites

I edited my comment as you were answering (sorry)
OK I think there are two things: I do not have an a19.1 Compo Pack 43 option when I am choosing the version.
I do not recall finding an instruction about copying those three text files over, but I went by the instructions so I'm hoping I did. Will try and figure out which ones they are :)
Thank you.

Link to comment
Share on other sites

On 11/28/2020 at 11:29 PM, quietone748 said:

I edited my comment as you were answering (sorry)
OK I think there are two things: I do not have an a19.1 Compo Pack 43 option when I am choosing the version.
I do not recall finding an instruction about copying those three text files over, but I went by the instructions so I'm hoping I did. Will try and figure out which ones they are :)
Thank you.

It should be a19.1 cp46 lol. 

 

If it not appearing in the drop down box then the 3 txt files have not been put into the nitrogen resource folder or you are using nitrogen in the dl folder instead of desktop or c drive etc.

Edited by stallionsden (see edit history)
Link to comment
Share on other sites

19 minutes ago, BadKarma said:

Thanks so much to all who are putting forth what I am sure is a ton of work in keeping this going.
I love the Nitrogen world generator and the awesome CompoPack prefabs as well!

THANK YOU!

Appreciate the feedback and kind words and glad you are enjoying the Compo Pack

  • Like 1
Link to comment
Share on other sites

14 minutes ago, WickesGuru said:

Trying to switch to the latest pack, 46, I get this every time I generate a map. When I go back to the previous version everything still works fine. Am I missing something?

previewMap.png

In the nitrogen program change the scenario to none. Tht is the ocd map for testing lol

Link to comment
Share on other sites

  • 2 weeks later...
1 hour ago, supercioni said:

Hello all!
A question, prefabs must be installed both  server side and client side?
is not clear if the rwg mod only need client side prefabs or both nitrogen ad rwg, personally i tested it on a nitrogen only server side and is working.

Thanks in advance.

Yes prefabs must be server and client side. 

 

Only choose one nitrogen dl or modlet dl. Same method tho both server and client side require the modlet . 

Link to comment
Share on other sites

8 minutes ago, supercioni said:
 
 


A question just out of personal curiosity.
The reason why it must also be installed on the client side, has to do with the rendering of the distant terrain, right?
does the game draw the low resolution model locally not from the server?

No idea really never looked into the why. Just know if it isnt, your game errors/bugs.  But could be a range of things inc the poi itself which contains the block data used loot containers etc etc. As well as the mesh as you stated.  Etc

Edited by stallionsden (see edit history)
Link to comment
Share on other sites

This is killing me because I love the Nitrogen maps as a generator and I love what Magnoli/Compo Pack brings interms of PoIs.  I used all the latest files while trying to play the Undead Legacy mod on a dedicated server and while everything seemingly works okay I'm getting render issues.  Graphical glitches all over the place particularly vendors standing in a block of iron and or doors being blocked etc.  I looked over the server logs and found the following

 

2020-12-19T20:08:36 324.443 INF VehicleManager saving 0 (0 / 0)
2020-12-19T20:08:37 325.040 INF Time: 4.45m FPS: 33.76 Heap: 3834.6MB Max: 3834.6MB Chunks: 240 CGO: 74 Ply: 1 Zom: 28 Ent: 32 (64) Items: 3 CO: 1 RSS: 6882.8MB
2020-12-19T20:08:54 342.469 WRN No chunk for position -2861, 38, 992, can not add childs to pos -2861, 37, 990! Block cntCar03SedanDamage0v06
2020-12-19T20:08:54 342.515 WRN No chunk for position -2865, 38, 1109, can not add childs to pos -2864, 37, 1109! Block ulmContainerSedanClassic02d2
2020-12-19T20:08:54 342.515 WRN No chunk for position -2865, 38, 1112, can not add childs to pos -2864, 37, 1112! Block ulmContainerHumvee02d2
2020-12-19T20:08:55 342.526 WRN No chunk for position -2866, 39, 1151, can not add childs to pos -2864, 37, 1151! Block garageDoorIndustrial
2020-12-19T20:08:56 344.216 WRN Entity block on pos -2847, 37, 992 not found!
2020-12-19T20:08:58 346.398 WRN No chunk for position -2868, 39, 1137, can not add childs to pos -2868, 37, 1135! Block garageDoorIndustrial
2020-12-19T20:09:07 355.055 INF Time: 4.95m FPS: 30.05 Heap: 3736.1MB Max: 3834.6MB Chunks: 240 CGO: 61 Ply: 1 Zom: 9 Ent: 13 (33) Items: 0 CO: 1 RSS: 6924.7MB
2020-12-19T20:09:10 358.118 INF [DECO] written 0

 

Anyone happen to know if this is related and/or is also experiencing these issues and if there's a way to fix the render issues?

Link to comment
Share on other sites

9 minutes ago, Mosgoth said:

This is killing me because I love the Nitrogen maps as a generator and I love what Magnoli/Compo Pack brings interms of PoIs.  I used all the latest files while trying to play the Undead Legacy mod on a dedicated server and while everything seemingly works okay I'm getting render issues.  Graphical glitches all over the place particularly vendors standing in a block of iron and or doors being blocked etc.  I looked over the server logs and found the following

 

2020-12-19T20:08:36 324.443 INF VehicleManager saving 0 (0 / 0)
2020-12-19T20:08:37 325.040 INF Time: 4.45m FPS: 33.76 Heap: 3834.6MB Max: 3834.6MB Chunks: 240 CGO: 74 Ply: 1 Zom: 28 Ent: 32 (64) Items: 3 CO: 1 RSS: 6882.8MB
2020-12-19T20:08:54 342.469 WRN No chunk for position -2861, 38, 992, can not add childs to pos -2861, 37, 990! Block cntCar03SedanDamage0v06
2020-12-19T20:08:54 342.515 WRN No chunk for position -2865, 38, 1109, can not add childs to pos -2864, 37, 1109! Block ulmContainerSedanClassic02d2
2020-12-19T20:08:54 342.515 WRN No chunk for position -2865, 38, 1112, can not add childs to pos -2864, 37, 1112! Block ulmContainerHumvee02d2
2020-12-19T20:08:55 342.526 WRN No chunk for position -2866, 39, 1151, can not add childs to pos -2864, 37, 1151! Block garageDoorIndustrial
2020-12-19T20:08:56 344.216 WRN Entity block on pos -2847, 37, 992 not found!
2020-12-19T20:08:58 346.398 WRN No chunk for position -2868, 39, 1137, can not add childs to pos -2868, 37, 1135! Block garageDoorIndustrial
2020-12-19T20:09:07 355.055 INF Time: 4.95m FPS: 30.05 Heap: 3736.1MB Max: 3834.6MB Chunks: 240 CGO: 61 Ply: 1 Zom: 9 Ent: 13 (33) Items: 0 CO: 1 RSS: 6924.7MB
2020-12-19T20:09:10 358.118 INF [DECO] written 0

 

Anyone happen to know if this is related and/or is also experiencing these issues and if there's a way to fix the render issues?

It is a vanilla lod bug tfp are aware of. Nothing to do with the CP. Exiting out and back in fixes it. Those lines you posted is a unity thing and yellow lines can be ignored vanilla games have them also. 

Edited by stallionsden (see edit history)
  • Like 1
Link to comment
Share on other sites

2 hours ago, stallionsden said:

It is a vanilla lod bug tfp are aware of. Nothing to do with the CP. Exiting out and back in fixes it. Those lines you posted is a unity thing and yellow lines can be ignored vanilla games have them also. 

Cool thanks, that does work!  Thanks so much for all the hard work towards this awesome pack!  I have also noticed that when I move a few hundred yards and new PoIs enter the frame, those same texture illusions appear again.  Unfortunately this makes questing in that POI really hard especially since restarting isn't really an option once you start a quest.  I ran a plain Nitro map with Vanilla PoIs (from the Prefab drop down list) and the same density and size settings etc. and the problem seems to have gone away, so I'm perplexed by this because I really want to play with the PoIs that this pack includes.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...