Attention! a20 hard crash bug

[Callum123456789]

if you are going into the skyscraper with the tag skyscraper_01 do not go to the roof as it will most likely brick you game at this current time in the experimental build it is very difficult to get out the way of this issue as i myself crashed 30 times before I managed to escape that hell lmao but seriously if your going to any of the skyscrapers make sure to check the poi tag if it is skyscraper_01 DO NOT go to the roof at all or the second floor below the roof 

[Darklegend222]

2 hours ago, Callum123456789 said:

if you are going into the skyscraper with the tag skyscraper_01 do not go to the roof as it will most likely brick you game at this current time in the experimental build it is very difficult to get out the way of this issue as i myself crashed 30 times before I managed to escape that hell lmao but seriously if your going to any of the skyscrapers make sure to check the poi tag if it is skyscraper_01 DO NOT go to the roof at all or the second floor below the roof 

I noticed that I had massive issues with the skyscraper in general even with occlusion enabled and having my settings set to low/medium. Unless you have a beefy computer that you don't mind running on potato settings, Dishong Tower is not where you should be currently.

 

Edit: I just saw another post about entirely crashing when doing a quest there, I didn't realize it was that bad. When I ran it I wasn't doing a quest .

Edited December 17, 2021 by Darklegend222 (see edit history)

[Star69]

An option to try is to either turn off dynamic mesh or set it to claim block only. This setting is in the third tab of video settings. This has helped a lot of folks with fps tanking around the skyscrapers.