Dracknar Posted April 26, 2022 Share Posted April 26, 2022 As Title. I have updated my server world, and have located it on the new region based server list. Game starts up fine on console for server. But trying to connect is giving me the "Could not retrieve server ID" error. I have no idea what is going on. Link to comment Share on other sites More sharing options...
robby80 Posted April 26, 2022 Share Posted April 26, 2022 Hi, We're facing the same issue currently. Removing steamnetworking from the disabled list works as a fix for now, but is not ideal Link to comment Share on other sites More sharing options...
Dracknar Posted April 27, 2022 Author Share Posted April 27, 2022 Ok good to know. I'm not actually sure what happened on my hosted server, but eventually, after just trying repeatedly, it eventually worked? I changed nothing. Just.. kept trying. Myself and one other player have now been able to connect. I'll monitor and see if it repeats when I try to get on next. Link to comment Share on other sites More sharing options...
Thundy Posted May 29, 2022 Share Posted May 29, 2022 Did you figure this out? I'm getting it too on a new server. All ports forwarded etc as they should be but no one outside my local network can connect 😐 Link to comment Share on other sites More sharing options...
robby80 Posted May 29, 2022 Share Posted May 29, 2022 Same problem as Dracknar, after some fidling it just worked, not sure what changed. Currently i have these ports forwardedfor 7d2d , normally the last 2 ranges should not be required, but worth a try. 26900:26905 8080:8081 27000,27100 Kind regards Link to comment Share on other sites More sharing options...
Star69 Posted May 29, 2022 Share Posted May 29, 2022 Yes, that range of ports forwarded will work. If it still isn’t working, use an online port checker to check that those ports are open. If running A20.5, be sure the 2 new lines are added to the serverconfig.xml. Also, in either your command line or serverconfig.xml you need to point to your userdata folder. Link to comment Share on other sites More sharing options...
Tazman3002 Posted December 30, 2022 Share Posted December 30, 2022 On 5/29/2022 at 4:28 PM, Star69 said: Yes, that range of ports forwarded will work. If it still isn’t working, use an online port checker to check that those ports are open. If running A20.5, be sure the 2 new lines are added to the serverconfig.xml. Also, in either your command line or serverconfig.xml you need to point to your userdata folder. How do you point the serverconfig.xml to your user data. Also i enabled the steamnetworking and that seemed to fix it. Link to comment Share on other sites More sharing options...
Star69 Posted December 31, 2022 Share Posted December 31, 2022 There is a default setting.....meaning as long as you did not change the location of the userdata folder from where it was set when the game was installed, you don't need to change anything. However, if you have a custom location for your userdata folder, there is a line in the serverconfig.xml to point to it. The following are the lines in the serverconfig.xml: <!-- Folder and file locations --> <property name="AdminFileName" value="serveradmin.xml"/> <!-- Server admin file name. Path relative to the SaveGameFolder --> <!-- <property name="UserDataFolder" value="absolute path" /> --> <!-- Use this to override where the server stores all generated data, including RWG generated worlds. Do not forget to uncomment the entry! --> <!-- <property name="SaveGameFolder" value="absolute path" /> --> <!-- Use this to only override the save game path. Do not forget to uncomment the entry! --> Link to comment Share on other sites More sharing options...
Bitcoin Posted January 20, 2023 Share Posted January 20, 2023 Guys, After about 2 hours of beating my head against the wall with this post...it was steam. Steam client was logged in on my server. Once I closed the steam client on the server I could log in from my client. CHEERS! 1 Link to comment Share on other sites More sharing options...
Potatoman Posted June 15, 2023 Share Posted June 15, 2023 On 5/29/2022 at 2:28 PM, Star69 said: Yes, that range of ports forwarded will work. If it still isn’t working, use an online port checker to check that those ports are open. If running A20.5, be sure the 2 new lines are added to the serverconfig.xml. Also, in either your command line or serverconfig.xml you need to point to your userdata folder. tysm, this fixed mine, for anyone wondering just erase steamnetworking and leave the space as "" Link to comment Share on other sites More sharing options...
SylenThunder Posted June 15, 2023 Share Posted June 15, 2023 7 hours ago, Potatoman said: tysm, this fixed mine, for anyone wondering just erase steamnetworking and leave the space as "" That's what you do when you are unable to properly forward the ports. Do note that it basically uses Steam servers as VPN, so will increase the latency on connections to the server. Link to comment Share on other sites More sharing options...
Potatoman Posted June 15, 2023 Share Posted June 15, 2023 11 hours ago, SylenThunder said: That's what you do when you are unable to properly forward the ports. Do note that it basically uses Steam servers as VPN, so will increase the latency on connections to the server. not sure how i could forward them any differently? I did it the same way I would with any other server I've setup so idk why this would be any different Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now