Johnp5813 Posted August 8, 2020 Share Posted August 8, 2020 Need some help. Looking to create my own POI in A19. I’m brand new to PC version and don’t know anything about anything. I’ve tried to mess around in prefab/world editor and I’m lost. Any tips/guidance is much appreciated. Link to comment Share on other sites More sharing options...
stallionsden Posted August 8, 2020 Share Posted August 8, 2020 Easiest thing is to just open the prefab editor and go crazy lol. There are also tips and tricks and helpful info in tutorials and guides section as well. When in editor hit escape and click help also will help you under stand things like z and moving the box around etc to. Link to comment Share on other sites More sharing options...
Johnp5813 Posted August 8, 2020 Author Share Posted August 8, 2020 Thanks. I’ll try that. Lol Do you know if their is a way to create/copy sections? I’m building a 200x200 pyramid and although I don’t mind putting in the work (i’ve built large structures the hard way on console) I thought pc would allow an easier/quicker way. Thanks. Link to comment Share on other sites More sharing options...
Laz Man Posted August 8, 2020 Share Posted August 8, 2020 10 minutes ago, Johnp5813 said: Thanks. I’ll try that. Lol Do you know if their is a way to create/copy sections? I’m building a 200x200 pyramid and although I don’t mind putting in the work (i’ve built large structures the hard way on console) I thought pc would allow an easier/quicker way. Thanks. Yes, you can copy/paste (use z key to highlight area you wan't copied > ctrl+C > move grid to different position > ctrl+V. Ctrl+Z is undo just in case you make a mistake.. Here is a youtube series that should help you with the basics. Link to comment Share on other sites More sharing options...
Johnp5813 Posted August 8, 2020 Author Share Posted August 8, 2020 Thanks to both of you. Much appreciated. Link to comment Share on other sites More sharing options...
Johnp5813 Posted August 9, 2020 Author Share Posted August 9, 2020 Spent some time in prefab editor and figured the copy/paste out. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.