Jump to content

Wood Frame - Ramp Corner Filler needs a complement shape


StrikeAgainst

Recommended Posts

I've recently started to build an octagonal pyramid. The ramp corner filler shape of the wood frame is a nice way to get a ramp turned by 45 degree, but as you can figure out on the image below, it's missing a complement shape type required to make the ramp even. Are there any plans to patch that in some time?spacer.png

Link to comment
Share on other sites

If you're using '<material> ramp corner filler" blocks (e.g. Wood Ramp Corner Filler" to make the base, and are wanting to fill in the little triangular holes, Look up "<material> ramp corner" blocks (e.g. Brick Ramp Corner").  It appears there's no wood one though!, so a valid "make new shape request", as I see it.  You'll have to rotate the "<material> Ramp Corner" block with the R option menu, using the "block with three arrows" option20210214142417_1.thumb.jpg.8e48660619a087f8a84479d5445e2dcb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...