marksisma_deliri
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Store
Articles
A20 Bugs
A21 Bugs
Events
Record Comments posted by marksisma_deliri
-
-
On 1/3/2022 at 7:14 PM, Liesel Weppen said:
malloc(): invalid size (unsorted)
from your log points to some problem with memory allocation. Since your video shows you have 16G RAM it should be sufficient.
If your installation is corrupted, try verifying your files, or even better download it from scratch. If possible also try installing it to another hdd/ssd just to test if eventually your hdd/sdd is broken.
I tried validating the game files through Steam earlier, there were no errors and no positive results either.
I cleared the directory of the game, then ran the validation Steam, all the files were loaded and the game ran. I was about to write a happy comment, but I decided to go out and run it again. But the game again did not start:( I moved the directory with the game on three different block devices (2 hdd and 1 ssd), creating a symlink in the Steam directory, with no positive result.
Finally I decided to check my RAM and got some pretty disturbing results:# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.Handle 0x0052, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0053
Error Information Handle: 0x0057
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: 029E
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: CMX8GX3M1A1333C9
Rank: 2
Configured Memory Speed: 1333 MT/sHandle 0x0053, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: 0x0054
Number Of Devices: 2Handle 0x0056, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0053
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: 029E
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: CMX8GX3M1A1333C9
Rank: 2
Configured Memory Speed: 1333 MT/s
memtester version 4.5.0 (64-bit)
Copyright (C) 2001-2020 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).pagesize is 4096
pagesizemask is 0xfffffffffffff000
want 8192MB (8589934592 bytes)
got 8192MB (8589934592 bytes), trying mlock ...locked.
Loop 1/5:
Stuck Address : ok
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
8-bit Writes : ok
16-bit Writes : okLoop 2/5:
Stuck Address : ok
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : testing 113FAILURE: 0x7171717071717171 != 0x7171717171717171 at offset 0x2d9dd220.
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
8-bit Writes : ok
16-bit Writes : okLoop 3/5:
Stuck Address : ok
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : testing 53FAILURE: 0xffdffffeffffffff != 0xffdfffffffffffff at offset 0x2d9dd220.
Walking Zeroes : ok
8-bit Writes : ok
16-bit Writes : okLoop 4/5:
Stuck Address : ok
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : testing 11FAILURE: 0xfffffffefffff7ff != 0xfffffffffffff7ff at offset 0x2d9dd220.
Walking Zeroes : ok
8-bit Writes : ok
16-bit Writes : okLoop 5/5:
Stuck Address : ok
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : testing 71FAILURE: 0xfefffffeffffffff != 0xfeffffffffffffff at offset 0x2d9dd220.
Walking Zeroes : ok
8-bit Writes : ok
16-bit Writes : okDone.
I have no idea what these errors mean. But apparently memtester writes some data and reads different data, when accessing a specific memory space, at offset 0x2d9dd220 right?
But shouldn't programs or operating systems have integrity control mechanisms when reading/writing and handle such cases calmly? Or such mechanisms work only with file system, but not with RAM?0 -
14 hours ago, Liesel Weppen said:
System specs or it didn't happen.
It DOES run fine on linux. You might have a different problem.
The 7dtd has been working for me since the A18. Even the experimental A20 worked without problems. The problems started after the release of b238. My computer is certainly far from perfect, but I have no problems with most other games. Even Fallout4 via Proton works relatively stable. Now I've checked everything I had. Discovered a problem running Civilization6, Steam return "corrupted size vs. prev_size". Maybe it all has something to do with the Steam update that came out before the new year. I tried running 7dtd through 7dLauncher.x86_64, same result.
0 -
6 hours ago, Jugginator said:
What version debian
cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
0 -
The game stopped starting on linux
in Not a Bug
Posted
I replaced the failed memory module. Also i found that the version of libc6 did not match the stable branch, while nvidia-driver, x-server and everything else was from the stable branch. Maybe it was because of some external repository. Anyway, i disabled all external repositories and updated my distribution to testing branch. 4 or 5 days i have no problem running 7dtd.
How do i close this thread now?