-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Store
Articles
A20 Bugs
A21 Bugs
Events
Record Comments posted by Zombieforlife
-
-
OK, I rebuilt in God mode. After rebuilding I had no structural integrity issue at all. I removed the sand a second time to cause the collapse and nothing happened. Sorry. I could not reproduce. A strange side effect was when I replaced the generator and traps and switch, the electrical wires spawned in on their own. A couple were missing and I could not reconnect the wires. But it all worked. Electricity was flowing but I couldn't changed the wiring. During collapse the wiring info remained as a ghost and glitched back in after reconstruction. Anyway, not sure what to do here with this bug, I guess it can be filed in the X-files. Note: I still think the chain reaction collapse should be removed. Only collapse the blocks that fail integrity. Don't let it spread to blocks that are on solid foundation.
0
Structural Integrity Issue
in Duplicate
Posted
OK so it seems this bug is already known about. Skippy's Youtube channel explains it. But essentially as I went around the foundation removing sand and replacing it with concrete the structural integrity would update when the sand was removed but not repair itself after the concrete is added. So once I removed the last sand block in the corner that was essentially holding up the base, the base collapsed. I was unable to reproduce it above because when I rebuilt in GOD mode I didn't repeat the removal and replacement from the beginning. I only repeated it for the last 3 blocks. Why did the base collapse even above solid concrete? Because the replacement concrete was not recognized. This is game breaking for sure. Once any block is broken out in your base and you have replaced it, you must go into dm and update the structural integrity. Otherwise these structural weaknesses will build up over time and your base will collapse as if you never fixed it in the first place.