jackleroy Posted January 6, 2018 Share Posted January 6, 2018 Hi everyone, I have a really quick question about mini bikes. I have tunnels going all throughout my map that are 2 blocks high by 1 block wide. Would it be possible for me to drive a mini bike through them or would I need to make them wider? Thanks is advance. Link to comment Share on other sites More sharing options...
crazywildfire Posted January 6, 2018 Share Posted January 6, 2018 Honestly I can't remember. I always make my mines wide and tall. I think you would need to make it at least 3 high. If you like to feel cramped and not no room to do anything not even turn around then you should be om as far as one wide but again not sure. Link to comment Share on other sites More sharing options...
jackleroy Posted January 6, 2018 Author Share Posted January 6, 2018 Honestly I can't remember. I always make my mines wide and tall. I think you would need to make it at least 3 high. If you like to feel cramped and not no room to do anything not even turn around then you should be om as far as one wide but again not sure. I typically just make a long and skinny pathway until I hit an ore that I want and clear out a large area until it seems like I got it all out, then rinse and repeat. Maybe it's not the best strategy, but it's how I understand mining to now work. Link to comment Share on other sites More sharing options...
crazywildfire Posted January 6, 2018 Share Posted January 6, 2018 But mini bike in mine and just mining are two different things here. At least in my opinion. Either way the choice is yours if you can drive in a 1 wide tunnel and want to do it that way go for it but I do think it does it have to be at least 3 high to be able to drive. But as I said I could be wrong maybe it can be 2 high. Link to comment Share on other sites More sharing options...
Walterstj Posted January 6, 2018 Share Posted January 6, 2018 My minibike wouldn't fit in a tunnel only big enough for me to fit in width wise... Height wise, 2 blocks was fine... But it had to be at least 2 blocks wide... It's borderline blinding if you have to have the headlight on though... I know a one block wide tunnel won't work with the bike though, and pack up your bike and store it... I left mine in the opening of my tunnel and after the horde night, my bike was up on the grassy ground exactly where I left it below on bedrock Link to comment Share on other sites More sharing options...
Damselx1 Posted January 6, 2018 Share Posted January 6, 2018 It is possible to use a minibike but you are risking the console thinking you are stuck and teleporting you above ground to a safe space. It is generally advised to dig a tunnel 3 high and 2 wide to avoid issues. Link to comment Share on other sites More sharing options...
jackleroy Posted January 7, 2018 Author Share Posted January 7, 2018 My minibike wouldn't fit in a tunnel only big enough for me to fit in width wise... Height wise, 2 blocks was fine... But it had to be at least 2 blocks wide... It's borderline blinding if you have to have the headlight on though... I know a one block wide tunnel won't work with the bike though, and pack up your bike and store it... I left mine in the opening of my tunnel and after the horde night, my bike was up on the grassy ground exactly where I left it below on bedrock It is possible to use a minibike but you are risking the console thinking you are stuck and teleporting you above ground to a safe space. It is generally advised to dig a tunnel 3 high and 2 wide to avoid issues. Awesome, thanks guys! Exactly what I needed to know. I really appreciate the input! Link to comment Share on other sites More sharing options...
EltzNC Posted January 7, 2018 Share Posted January 7, 2018 If you have your tunnel only 2x1, if you get off the bike in the tunnel you can not get around it. You could dig some pit stops that are larger along the tunnel where you plan to park. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.