Missing plate shape to fill a corner with a block and ramp!

[Gr3atsaga]

I am working on a horde base design and looking into the various plate shapes to help beef up the walkways. I have found a few that work well on the sides on the blocks that make the walkway and the ramps leading up to it, but cannot find a shape to fill the corner between them. I can get close with the "Plate Diagonal Wall Left' and "Plate Diagonal Wall Right" and "Plate Corner 1/2 Wall Offset" but none with a flat plate on one side and a 1/2 triangle on the other.

[Riamus]

There are very few shapes that cover 2 sides like you're trying to do.  A21 might include more as they are adding almost 700 new shapes but I don't think what you are looking for is in A20.  You may be better off just placing plates on the outside rather than the inside so that you don't need to cover 2 sides with a single shape and can just put a square plate in that inner spot and not worry about the angled side.  If that doesn't work for your base design, you may need to consider some alternative to how that is designed.

Edited May 8, 2023 by Riamus (see edit history)

[SylenThunder]

Moved to Pimp Dreams since this isn't a bug or support issue. I did check a21, and was unable to find the shape there, so here is hoping they see this and add it.