ErrorNull

after testing things a bit, it's unfortunately a no. the uma system was pretty much gutted from a21. so there's no way to update my UMA style zombies. they will be left to unlive the rest of their days on alpha 20. i do have a fraction of those zombies that don't use UMA which i could recover kinda (there's still a bit of lost details and effects due to alpha 21 changes), but for now will leave it be. to create custom zombies, the easiest remaining method is the texture swap method that the Snufkin zombies and Robelotto zombies use. they're both great zombie mods that adds lots of variety. of course the most die hard complete way is to create your own 3D models and import using NPCMod. i'm slowly learning Blender and currently returned to modding Minetest with plans to continue my enZombie mobs there in the low poly blocky style, but who know's... if my 3D modeling skills get good enough, i might attempt to 3D model custom zombies for NPCMod.........

ah i see. those other UDP ports! i've added them to my router and litenetlib is working now and with steamnetworking disabled. tested with my bro and no more rubber banding. thanks for your quick response. 👍

How can I ensure my server is listening/running/allowing LiteNetLib. All my players are falling back on SteamNetworkingClient. Background: i have a dedicated server (windows) setup in my home running 7D2D, behind a typical residential high speed cable internet connection. My bros, kids, and a few friends have been playing on this server setup for several years without issue. they can find my server within the 7D2D server browser just fine and connect successfully. it's only on this last alpha 21 B317, that my bro is getting zombies rubber banding everywhere when there's more than like 3-4 zombies in the fight. strangely he does not experience much lag in any other aspect of the game: his fps is okay and his in-game character doesn't lag. other players do not experience this zombie rubber banding at all. and again, this rubber banding does not occur at all when playing alpha 20.7 or prior on my server. i also host valhiem, don't starve and minecraft on my server (not running at the same time of course), and i haven't heard reports of lag issues. in troubleshooting further my bro noticed this from his 7D2D client logs: 2023-06-25T06:07:43 85.921 INF NET: LiteNetLib trying to connect to: 98.xxx.xxx.xxx:26900 2023-06-25T06:07:48 91.795 INF NET: LiteNetLib: Connection failed: ConnectionFailed 2023-06-25T06:07:48 91.795 INF NET: Steam NW trying to connect to: 98.xxx.x.xxx:26900 2023-06-25T06:07:48 91.796 INF [Steamworks.NET] NET: Connecting to SteamID xxxxxxx 2023-06-25T06:07:48 91.798 INF Started thread SteamNetworkingClient 2023-06-25T06:07:52 95.486 INF [Steamworks.NET] NET: Connection established 2023-06-25T06:07:52 95.528 INF [Steamworks.NET] NET: Password accepted (the IP and SteamID is x'd out for security) i soon realized that ALL players to my server are getting this same LiteNetLib connection failure and is falling back on SteamNetworkingClient. I've come to understand that SteamNetworkingClient is horrible, and players should connect using LiteNetLib when possible. Below is what I've done so far, but players still fall back to SteamNetworkingClient... Ensured router port forwarding: External Port = 26900 Internal Port = 26900 Protocol = BOTH (TCP and UDP) Server Internal IP = 192.168.xxx.xxx Windows Inbound firewall settings (on the server): 7daystodieserver.exe = allow both TCP and UDP connections from any local and remote address 7D2D Server Litnetlib confirm: When running up the 7D2D server, it shows Litenetlib execution ok 2023-06-25T05:32:47 5.468 INF NET: Starting server protocols 2023-06-25T05:32:47 5.592 INF NET: LiteNetLib server started 2023-06-25T05:32:47 5.593 INF [Steamworks.NET] NET: Server started 2023-06-25T05:32:47 5.593 INF Started thread SteamNetworkingServer 2023-06-25T05:32:47 5.594 INF StartGame 2023-06-25T05:32:47 5.595 INF NetPackageManager Init Port scanner site ( https://portchecker.co ) confirms port 26900 is open on the public IP to my server. My bro can telnet to port 26900 successfully, and it spits back all my server game config details. 7D2D serverconfig.xml setup below: <!-- Networking --> <property name="ServerPort" value="26900"/> <!-- Port you want the server to listen on. Keep it in the ranges 26900 to 26905 or 27015 to 27020 if you want PCs on the same LAN to find it as a LAN server. --> <property name="ServerVisibility" value="2"/> <!-- Visibility of this server: 2 = public, 1 = only shown to friends, 0 = not listed. As you are never friend of a dedicated server setting this to "1" will only work when the first player connects manually by IP. --> <property name="ServerDisabledNetworkProtocols" value=""/> <!-- Networking protocols that should not be used. Separated by comma. Possible values: LiteNetLib, SteamNetworking. Dedicated servers should disable SteamNetworking if there is no NAT router in between your users and the server or when port-forwarding is set up correctly --> <property name="ServerMaxWorldTransferSpeedKiBs" value="512"/> you can see above that both LiteNetLib and SteamNetworking are enabled since i lieft he property "ServerDisabledNetworkingProtocols" blank. if i changed this value to SteamNetworking, no players can connect to my server. My bro tried a few other public 7D2D servers that's running alpha 21 B317 and is able to connect using Litenetlib and does not get rubber banding effect. it appears that even though my server appears to be running LiteNetLib successfully, outside clients are not getting LiteNetLib acknowledgement and fall back on SteamNetworking. is there anything i have overlooked or that i can do here? thanks much for any ideas!

yep. will get a chance to test it out here in a few days and fix any compatibility issues. have you noticed anything so far?

unfortunately the floaty behavior of the zombies is because of the underlying UMA system that the characters and zombie models are based on. the devs would have to help fix this, but another unfortunately is the devs already stated that the UMA system is no longer supported and will be removed in future updates.

unfortunately, the UMA system will not be fixed as it will be replaced with a different system in the future.

i haven't played vintage story but have been following it for a while. it's got all the stuff i like --- great crafting, exploring, biomes, weather, etc. i may need to buy the game to see how far i can mod it to follow some more of the 7 days aspects i like (non blocky terrain, hordes of mobs, etc). good stuff.

hi @a_jp just so that i better understand, you have this mod installed on a dedicated server and after you finish the game session, do you want to you know to restart to play the game again? if that is your question, that what you need to do is on the serverconfig.xml file you just create new name for the GameName. then you restart the server, and the players can start over to play again. below is the what the GameName property looks like on the serverconfig.xml file on the server: <property name="GameName" value="yourGameName01"/> whenever you want to start a new game and play the tower defense again, just change the value of "yourGameName" to something new each time. let me know if that helps. i'm looking to make a game with similar physics and zombie variety like 7 days, but with less focus on fast pace fps / modern weapons, but instead more focus on infinite biome exploration above ground and below ground like minecraft, and casual survival elements for all ages like Don't Starve together. too many open world survival games turn into counter strike, fortnight, or some military combat game these days. i prefer survival that's more slow paced like valheim and lots of looting and strategy like project zomboid. what are some mods or game ideas that you would like to see?

still here and about. just now posted teamplay vid of me and @Cs021 as well as our score on the front page multiplay leaderboard. our team average score was 2979. 😎 while waiting for alpha 21 to release, i've decided to try my hand at making my own open world survival game using unreal engine. it's going to be a very long term project but has been something i've always wanted to do. more info on my webpage here

uploaded multiplayer playthrough with me and @Cs021 . the video is taken from my pov. will have our team average score posted on the leaderboard by tomorrow. this had me thinking about how the multiplayer leaderboard should be run. for multiplayer, the most fair way is to take the average score of all players in the party. so if there were 3 players in the party, and P1 got 2,000 pts, P2 got 3,000 pts, and P3 got 4,000 pts, then the average team score is 3,000. and this is the score that will be posted on the multiplayer leaderboard as a single team and not individual scores. simply posting the total of everyone's score onto the leaderboard wouldn't be fair, as larger teams will have more players and therefor more zombie kills. and if we instead post the score of each individual team member onto the multiplayer leaderboard, then those who played more supportive roles (building, air support, etc) will always battle fewer enemies and receive less points. youtube video of our playthrough below. it's a good 2hrs and 50min as we got to horde stage 20 😎 . the video description has some timed jump points to a few interesting parts.

nice run @Cs021 👍 as one of my frequent playtesters for enTowerDefense, you sure have found some good strategies. in addition to heavily fortifying the tower from all sides, i can see you're also taking advantage of the fact that zombies tend to pause their spawning if you don't have line of sight to the arena floor. so when you're hidden within the walls of your fortified base, it's only when you peek outside that new zombies will drop into the area. the positive is that it keeps you safe and zombie count to minimum if you need spend time to repair and upgrade gear and update skills, but the negative is that your potential zombie kills and score would be slower compared the players to who keep the zombies coming in nonstop. looks like you're the one to beat now for rank #1 on the single player leaderboard!

great video and nice strategy with blocking off the stairs and leaving a ledge on the opposite side to hop onto. you might want build up walls and floors next time on the tower frame to shield off those vomit attacks.. but still got to stage 8 which isn't bad at all. i've added you to the singleplayer leaderboard at rank #1 🏆👍. hope you enjoyed the battle. thanks for the suggestions. i'd like to keep it all simple and to help reduce lag, so i'm avoiding putting in extra decorations on the map for now. adding turrets for single player would be tricky because i don't have a way to ensure it show up only for single player and not in multiplayer for the vending machines or in the loot bags. but adding lanterns would be a good idea and helpful for everyone... so i'll add them in the vending machines. 👍

here's a video from an earlier version - doesn't have the tower frame and a few other things, but the main mechanics are there. this vid doesn't show lots of zombies spawning and doesn't get too crazy, since i was just demonstrating the concept... but the battle gets very hairy after a couple horde stages during normal play. i may do a real play tomorrow with my kids and can post that up. 😁

@CrypticGirl ok i think i got it. first time i've created a custom map to share so just now figuring this out. 😁 looks like there's some custom prefabs that need to be downloaded as well. i updated my original post with the details, and copied for you below. let me know if this fixes it. Download the prefabs that represent the battle arena labeled enTowerDefensePrefabs. Copy all the prefab files into your "LocalPrefabs" folder. The LocalPrefabs folder should be located inside the same folder where your GeneratedWorlds and Saves folder are. the prefabs are available from the same github link very true haha. you're pretty much doomed. but actually, one strategy is the load up on healing if you are getting close to 50HP.. that way if you get KO'd, you are still slowly healing from the bandage/med kit and will self-recover back above 50HP again... then flee the fight to live another day

Hi @CrypticGirl It sounds like you're spawning out in the grass/ground and not within the arena which has concrete floors. The arena is part of the enTowereDefenseArena map. Do you see the arena anywhere at all when you spawn? Also, did you ensure the map was downloaded and copied to the correct game folder? Steps described in the Requirements section. Let me know if still having issues.

tower defense mod completed. 😎 i created a brand new mod page for it now to return my attention to my main enZombies and finish these farmers. hope everyone is have a nice holiday season wherever you are.

ErrorNull's Tower Defense: This is a server-side mod that has players battle an endless horde of zombies within an enclosed arena. Gameplay is focused on fast-paced action. There is no crafting or repairing, and building only consists of the basic cube blocks of wood, cobble, concrete, and steel. Zombie kills give you coins, and all items are obtained from vending machines. If your health drops too low, you are knocked out and a teammate must heal you. You become a spectator if you die and unable to inflict damage - zombies mostly ignore you and cannot cause damage to you either. When all players die, the session is over, and a new game must be started to play again. There are a total of 20 horde stages. The goal is to reach stage 20 and last as long as possible... OR achieve the highest number of zombie kills (green HUD icon) or highest score (yellow HUD icon). Post a video of your best SCORE to show off your skills. You'll be added to my leaderboard of top 10 craziest zombie rambos. 🧟‍♂️🧟‍♀️🏆🏆✨ LEADERBOARD ✨🏆🏆🧟‍♀️🧟‍♂️ The leaderboard only applies to your total score. This is tracked by the yellow trophy HUD icon. I will use the score that you achieved right before you died and unable to resurrect yourself. If in the amazing chance you make it to horde stage 20 and somehow continue to survive forever, I will use the score you achieved at 12AM of Day 4 in game time as the cutoff point. Let's please keep it honest, fair, and fun for everyone. RULES: You must configure the game options/properties according to the Requirements section (section below). Video record your playthrough. You can use OBS Studio and upload to Youtube or Twitch, or send me the video file via Google drive or any other file sharing site, or stream directly on Twitch or Youtube. Share the unedited video link here. I'll review it and if all looks good, I will take a screenshot with your high score, and post the screenshot and your video links on the leaderboard for everyone to be impressed with. 😎 SINGLE PLAYER MULTI-PLAYER DOWNLOAD Version 1.3 (updated 12/25/2022) - 👉 Download from GitHub 👈 Do not use any other mods with enTowerDefense. Mods that only tweak the on-screen HUD should be fine. Using any mods that modify items, zombies, player behavior, or anything else can cause unexpected behavior or errors. A custom map and prefabs are required for play. See below "Requirements". REQUIREMENTS Download the custom map and prefabs from this GitHub page The file should contain two folders "enTowerDefenseMap" and "enTowerDefensePrefabs". For single player game or hosting a multiplayer game from the same computer you will play on: For multiplayer on a dedicated server: HOW TO PLAY Kill zombies for 20 stages while buying necessary items from vending machines. Last as long as you can, or try for the highest score or most zombie kills! TIPS & TRICKS GAMEPLAY TWEAKS These are the tweaks to the vanilla game as well as new mechanics that were added for this mini-game. SCREENSHOTS I welcome your suggestions and feedback. Enjoy. 😎

i've been refining my tower defense mini game. i think it's almost ready for release soon.

hi @Un4given291 - usually that's because the zombieHarvest mod is loading before the main enZombies mod. be sure your mod folder has the enZombies listed first, before enZombiesHarvest. if you have the word "-main" at the end of the mod folders, trying removing that as that usually causes the problem. hi @a_jp i am glad you like my zombies. i understand how some servers do not allow naked women. that is why i created a mod that will automatically cover up all naked female zombies. this mod is called "No Nudes" . you can download it below: https://github.com/ErrorNull0/enZombiesSettings/tree/main/enZombiesSettings01NoNudes

This is super useful for us molders, thx!

Hi @Yeark sorry that has been a known issue. i will be revisiting that and see if there's a different workaround.. maybe a special tile that will shock only uma type zombies...

oh that's cool. is a link to that mod still floating around online somewhere? would be interested to check it out.

aside from the half sized male goblins, the closest i got to younger zombies using UMA assets look more like between teen and younger lady zombies. refer below middle three zombies - a farmer girl, wildling girl, and a screamer maiden. it doesn't seem possible to make small children looking zombies with the UMA textures that's avail. sure it's def possible using custom 3d models.. but i don't know how to do those.

FYI - I created a page on my github that i'll be using to track progress on my updates. With this, everyone can have a better idea of what items are remaining on my to-do list before my next version update is released. https://github.com/ErrorNull0?tab=projects

hello, are you referring to the female zombie wearing the black skirt and high heels? she's not showing that much really, but as BFT2020 mentioned you can swap her mesh with like any other female zombie or whatever zombie. you'd go into the entityclasses.xml file that's located in \\7 Days To Die\Data\Config folder. Look for the following: <entity_class name="zombiePartyGirl" extends="zombieArlene"> <property name="SizeScale" value="0.99"/> <property name="Tags" value="entity,zombie,walker"/> <property name="Mesh" value="#Entities/Zombies?Prefabs/ZCocktailWaitress.prefab"/> <property name="MoveSpeedAggro" value="0.3, 1.35"/> <!-- slim, regular --> <effect_group name="Base Effects"> <passive_effect name="HealthMax" operation="base_set" value="125"/> </effect_group> </entity_class> then on the line that says <property name="Mesh" value="#Entities/Zombies?Prefabs/ZCocktailWaitress.prefab"/> ... you'll want to change that to show a different zombie prefab. like if you wanted to swap in zombieArlene's prefab, then the result should be like this: <entity_class name="zombiePartyGirl" extends="zombieArlene"> <property name="SizeScale" value="0.99"/> <property name="Tags" value="entity,zombie,walker"/> <property name="Mesh" value="#Entities/Zombies?Prefabs/ZArlene.prefab"/> <property name="MoveSpeedAggro" value="0.3, 1.35"/> <!-- slim, regular --> <effect_group name="Base Effects"> <passive_effect name="HealthMax" operation="base_set" value="125"/> </effect_group> </entity_class> you will also need to do the same for the radiated version of the party girl and change the mesh to match zombie Arlene's radiated mesh: <entity_class name="zombiePartyGirlRadiated" extends="zombiePartyGirlFeral"> <property name="Tags" value="entity,zombie,walker,feral,radiated"/> <property name="Mesh" value="#Entities/Zombies?Prefabs/ZArleneRadiated.prefab"/> <property name="DismemberMultiplierHead" value=".4"/><property name="DismemberMultiplierArms" value=".4"/><property name="DismemberMultiplierLegs" value=".4"/><!-- Radiated --> <property name="PainResistPerHit" value=".9"/><!-- Radiated --> <property name="ExperienceGain" value="1200"/><!-- XP grunt radiated --> <effect_group name="Base Effects"> <passive_effect name="HealthMax" operation="base_set" value="451"/> <triggered_effect trigger="onOtherDamagedSelf" action="ModifyCVar" target="self" cvar="RadiatedRegenAmount" operation="set" value="4"/> <triggered_effect trigger="onOtherDamagedSelf" action="AddBuff" target="self" buff="buffRadiatedRegen"/> </effect_group> </entity_class> hope that helps. if you are talking about a different stripper zombie from some other mod (like my enZombies mod?), let me know.