AH64_Jimbo

Thank you very much! I am so glad to hear that you are enjoying it! This is very true! Runways are numbered based on compass or rather magnetic heading, rounded to the nearest 10 degrees. Since 7DTD is based in fictional Navezgane County, Arizona that would give a magnetic declination of about -11 degrees from true north (give or take a degree or so, based on several factors). So while you are technically correct and very astute at noticing that the runways are aligned perfectly with the true cardinal directions (North, South, East and West). However, the compass heading that a pilot would see when landing or taking off would be off by about 11 degrees. For example, a pilot landing to the north would see a compass heading of about 349 degrees, thus why the runway is numbered 35. I used to be a pilot, so I try to incorporate real-world aviation practices into my prefabs as much as possible! Again, though, good catch and I am glad that you are enjoying adventuring at the airport!

I'm thrilled to announce a brand new Tier 5 POI added to the 7 Days to Die airport mod , Jumbo Jet Emergency Landing Featuring a large, 4-engine double-decker airliner left on the runway where it apparently came to a halt during an emergency landing. Curious Survivors will have to fight their way past the doomed emergency workers still at their posts, before they can discover what is left inside the aircraft itself. Beware! The zombie hordes seem exceptionally riled up around this behemoth aircraft. What dangers reside inside and outside near this aircraft? What secrets does it hold, and what loot can be obtained for the Daring Adventurer? Download the mod and find out, Survivor!

Yeah, that did the trick! The bad Junk Drone data is gone, it no longer appears in the list entity group, and the 'Origin ray fail' errors are gone. Thanks, Riamus! For anyone else who is still having trouble, and a jd clear command is not working, try to delete; drones.dat drones.dat.bak from your save file. i.e. C:\Users\<YOUR USER NAME>\AppData\Roaming\7DaysToDie\Saves\<MAP NAME>\<YOUR SAVED GAME NAME>

Unfortunately, the error occurred near my base. If I do leave the area, yes, the error stops. I have to go a good distance away (~500 meters give or take), so I will usually teleport somewhere and then back. However, the error is persistent, and occurs when I return to the area around my base. Reloading the game had no effect. I've tried the jd clear command a few times, and that has had no effect; The bad Junk Drone data also persists for some reason, and the 'Origin ray fail' error continues.

In one of my saves, I have been experiencing this 'Origin ray fail' error, too. In this case, I lost a drone to the dreaded NaN NaN NaN bug. However, I have also lost a bicycle to the void as well, during the worst of this unplayable error. Though I managed to replace my bicycle using the creative menu, I have been unable to effectively use other console commands since the 'Origin ray fail' errors bombard the logs. At any rate, I was able to capture logs; https://justpaste.it/38xnq

Thank you for the information, Viper Seven, but my individual prefabs are already smaller than that; My airport is comprised of over a dozen inter-connected prefabs, the largest of which are the special airport RWG tiles at 150x150 blocks. You could consider my airport as a small town, rather than one giant POI. I take it as a compliment that the illusion that it is one massive POI is working. 🙂 My main issue with Random Gen at the moment is trying to get Random Gen to align RWG tiles and the airport prefabs in a certain, predictable way. Right now Random Gen is just that; Random. I require a certain degree of order to make it work.

UPDATE: I worked with the server owner to get a new localization.txt file in the Config folder over to him, and that seems to have fixed the hanging loading screen issue.

Hello All, Do Mods need to be handled differently in Alpha 21 vs. Alpha 20 and/or handled differently when placed on a Multi Player dedicated server vs. Single Player client? Some people that have downloaded my 7 Days to Die Airport Mod have complained about some various issues when trying to install my mod on their MP server. For the record, SP seems to work just fine with one caveat; I found that I need to pull the modded map that I made from my Mod's Generated World folder into the main user's Generated Worlds file in order to see the map. In Alpha 20, this step was not necessary. So in other words I had to move this ; C:\Users\Nexus\AppData\Roaming\7DaysToDie\Mods\7 Days to Die Airport\GeneratedWorlds\Circling Vulture Valley to this; C:\Users\Nexus\AppData\Roaming\7DaysToDie\GeneratedWorlds\Circling Vulture Valley Here is a list of some of the issues reported; Missing Zombies from Airport POIs Airport POIs disappearing when approaching them Joining a Game and then it gets hung up on the Loading Screen stating "Receiving and loading configs..." For the two former issues, I believe what is happening is that the game does not read, recognize or load the prefabs from the Airport Mod folder. I'm at a loss about the last issue, though. The server owner was kind enough to provide logs, though. For troubleshooting Issues: Did you start a new game and re-create the issue? Yes Have you validated your files through Steam? Yes After validation, did you re-try with a brand new game? Yes Mods Used: 7 Days to Die Airport Teragon POIs LOGS Server owner's Client-side logs: https://pastebin.com/EiS1WdJ2 Server-side Logs Part 1: https://pastebin.com/bzSkzHDL Server-side logs Part 2: https://pastebin.com/y7ENZRH0 My Client-side logs when trying to join the server: https://pastebin.com/XatQ9Ryv

Ain't that the truth! With all the new POIs, Navezgane needs an expansion. I hope TFP revamp the cities, too.

I have, actually. The biggest problem is where do I put it? There may be some places, especially along the map edges, but I'd likely end up having to erase some of TFP work in order to make it fit. If anyone wants to take my prefabs and tackle this, I'd be more than happy to support them. What I would rather do instead is create a custom-made 6K map from scratch, where all of the terrain is hand-crafted, all of the roads are purposefully painted and all of POIs (including TFP POIs) are carefully placed. This would, of course, be much more time-consuming than just modifying a Random Gen map. There are some other ideas that I would like to implement in the future like; Adding additional and varied POIs Create aviation-specific props to be used in the airport and aircraft, like actually airliner seats Creating 'Tiered' Airports such as private airstrips, smaller local airports and Air Force bases. Get my Airport prefabs to work with Random Gen That last one, adding my airport to Random Gen, has been a tough nut to crack. Currently it's not compatible with Random Gen and would take a bit of coding to get all of the tiles to line up correctly. I have some ideas, though, and have been making small incremental progress. In the meantime, I've got another POI in the works. It's still being developed, but here is a preview;

Created a 7 Days to Die mirror, in case players want to download this airport mod, but do not want to register on Nexus Mods https://7daystodiemods.com/navezgane-regional-airport/

I like the idea of a zoo, too. If I were designing a zoo, I would make multiple POI's sitting atop an RWG tile or two making the whole zoo a mini-district itself. This is how I designed my Navezgane Regional Airport as a collection of inter-connecting POI's. Each POI could represent a specific habitat or exhibit with the RWG tile(s) as the platform for the zoo path. As far as too many animals and thus too many resources go, I would probably balance that with more gore piles and fewer live animals. Still, I think a zoo is a great idea. If The Fun Pimps don't do it, somebody should create a mod.

I largely agree with your points here, though I am onboard with most people's concerns. I agree! It'd make customization more accessible.

Updated Airport for Alpha 21 is here! Happy 4th of July! https://www.nexusmods.com/7daystodie/mods/2786

I haven't used KingGen for over a year, ever since TFP switched over to using RWG tiles in Alpha 20. I totally forgot about the KingGen tools. It worked, though! Thanks! Just remember to use the 8-bit converter and not the 16-bit.